This button is inactive unless you select the image -> PICT file HotKey.
Select a default application to use when you open a PICT file saved by Flash-It.
This button is inactive unless you select a HotKey which already has a key assignment first.
Deassign the key assignment from the selected HotKey.
This button is inactive unless you select a HotKey in the list above first.
Assign a new key assignment to the selected HotKey.
HotKey to modify a few of the Flash-It options without going through the control panel.
HotKey to send an existing image in the clipboard to the destination that you specify.
HotKey to capture a screen-region, then send the image to the destination that you specify a second later.
HotKey to capture a screen-region and print it.
HotKey to capture a screen-region and save the image to a PICT-based disk file.
HotKey to capture a screen-region and save the image to the scrapbook file.
HotKey to capture a screen-region and save the image to the clipboard.
When this box is un-checked, you have to manually select the screen-capture region whenever you use a capture HotKey.
Currently Flash-It is respecting the screen-capture region which has been previously used. To turn this off, uncheck this box.
Currently Flash-It is not using a default folder to save PICT files. To switch, click on the check box on the left.
The current default folder to save PICT files with Flash-It is shown here. To modify, click here and select a new folder with the file-open dialog.
Flash-It will not try to use a default folder, when saving a captured image to a PICT-based disk file.
When saving a captured image to a PICT-based disk file, always try first to use a default folder.
Select the notification sound to use when Flash-It lets you know of a successful screen-capturing. You may also choose to invert the captured screen area without using a sound.
When caps-lock key is down, capture the front-most window. If a standard menu is pulled-down, then, capture only the displayed menu.
When caps-lock key is down, capture the entire screen of the monitor where the cursor is located.
Use Lasso tool for selecting the screen capture region, i.e., a free-hand selection.
Use Marquee tool for selecting the screen capture region, i.e., a rectangular selection.
Click here to change the scaling factor to shrink the captured image.
Click here to change the scaling factor to magnify the captured image.
The cursor/pointer image will not be captured. Check here if you wish to capture it, also.
The cursor/pointer image will be captured. Uncheck here, if you do not wish to capture it.
When this box is checked, Flash-It shows a start-up icon on the desktop during the reboot process.
Flash-It HotKeys are inactive now. To activate them check here.
When this box is checked, Flash-It HotKeys are active.
Use this popup menu to toggle between two pages available for this Flash-It control panel.
Display the help window which gives a basically the same info as what is available from this balloon help.
